Kenwood KDC-9017 - Manual (Page 11)

In Source mode:
In Stand by mode:
Please see the menu settings about selecting the display mode.
For details refer to the Switching Display Mode page for the
menu settings. (page 33)
NOTE
"ALL OFF"
Demonstration
Date + Clock + Function indicator
Demonstration
Spectrum Analyzer 1
Spectrum Analyzer 2
Spectrum Analyzer 3
Spectrum Analyzer 4 (KDC-X917/X817/9017)/
Each source display+ Graphic (KDC-X717)
This function switches the type of information on the display
in the full screen display mode.
Each time you press the CLK button, the full screen display
changes as follows:
Switching Full-Screen Display
You can adjust the faceplate angle for easy viewing.
Sliding the faceplate:
Press the ANG button for at least one second.
Do not apply excessive force to the faceplate under setting 2.
NOTE
Faceplate Angle Adjustment
Press the Q button to end the speaker setting mode and
woofer setting mode.
• Speaker setting function allows for tuning of bass, middle and
treble.
• Woofer setting allows for tuing of high-pass filter frequency,
low-pass filter frequency and non-fading level.
NOTE
5
— 11 —
KDC-X917(K)_U.S_r3 00.12.26 1:12 PM Page 11