Kenwood KDC-MP435U - Manual (Page 15)

English | 15
• When the iPod is connected to this unit, “KENWOOD” or
“ ✓” is displayed on the iPod to indicate that you cannot
operate the iPod.
• When the USB device is connected to this unit, it can be
charged up provided that this unit is powered.
• When the Multi Card Reader is used, refer to
Search> (page 15).
• After you stopped playing a file contained in the USB
device, you can restart playing the file from the point
where you stopped its playback.
Even after removing the USB device, you can restart
playing the file from the point where you stopped its
playback as long as the files contained in the USB device
are all the same.
• Be sure to insert the USB device connector as far as it will
go.
Pause and play
Press the [ 38] button.
Each time you press the button, the audio pauses
or plays.
Removing the USB device
1 Set the remove mode as the USB source
Press the [ 0] button for at least 2 seconds.
"REMOVE" display blinks.
2 Remove the USB device.
Drive Search
Selecting the device inserted in the Multi Card
Reader.
1 Put the playback to pause
Press the [S.MODE] button.
2 Select a device
Push the Control knob towards up or down.
3 Restart playback
Press the [S.MODE] button.
⁄
• This unit is compliant with Multi Card Readers with a
maximum of 4 slots.
• If a device is inserted during connection of the Multi
Card Reader, it is not recognized. Select the Remove
mode with reference to
(page 14), remove the Card Reader, and then insert the
memory.
Playing External Disc
Playing discs set in the optional accessory disc
player connected to this unit.
Press the [SRC] button.
Select the display for the disc player you want.
Display examples:
Display Disc player
"CD CH" CD changer
"MD CH" MD changer
Pause and play
Press the [ 38] button.
Each time you press the button, the audio pauses
or plays.
⁄
• Disc 10 is displayed as "0".
• The functions that can be used and the information that
can be displayed will differ depending on the external
disc players being connected.
Fast Forwarding and Reversing
Fast Forwarding
Hold down toward [ ¢] with the Control knob.
Release to resume the playback.
Reversing
Hold down toward [ 4] with the Control knob.
Release to resume the playback.
⁄
• The accurate play time is not displayed during fast
forwarding or reversing of the Audio file.