Kenwood DDX3048 - Manual (Page 47)

English 47
Menu items Selectable setting/item Initial: Underlined
Connection ♦ Connect
♦ Disconnect : ☞ page 41
: ☞ page 41
PIN Code Changes the PIN code of the unit.
• Touch the current PIN code, enter a new PIN code, then press [Enter].
Device Name Shows the device name to be shown on the Bluetooth device — “KENWOOD
BT MM-5U2.”
Device
Address Shows the MAC address of the unit.
Phone
Device*
1
Shows the phone device name.
Audio
Device*
2
Shows the audio device name.
Auto
Connect ♦ OFF
♦ ON : Cancels.
: The connection is automatically established with the last
connected Bluetooth device when the unit is turned on.
Bluetooth
HF/Audio Select the speakers used for Bluetooth (both phone use and audio player).
♦ Front Only
♦ All
: From front speakers only.
: From all speakers.
Initialize Hold [Enter] to initialize all settings you have made for using Bluetooth
mobile phone and Bluetooth audio player.
Auto
Response*
1
♦ OFF
♦ ON
: The unit does not answer the calls automatically. Answer
the calls manually.
: The unit answers the incoming calls automatically.
SMS Notify* 1 ♦ OFF
♦ ON : The unit does not inform you of the arrival of a message.
: The unit informs you of the arrival of a message by ringing
and displaying “Receiving Message.”
Ring Mode ♦ System
♦ Phone : Selects the ring tone set on the unit.
: Selects the ring tone set on the mobile phone. (This
function may not work depending on the mobile phone.)
Ring Tone
Change*
1
When <Ring Mode> is set to <System>, press [Enter], then select the ring
tone for received calls and SMS from <Tone1>, <Tone2>, <Tone3>.
♦ Call Tone
♦ Message
Tone
: Selects the ring tone for phone calls.
: Selects the ring tone for SMS .
* 1 Appears only for < Hands Free Mode >.
* 2 Appears only for < Bluetooth Mode >.
EN_DDX_K.indb 47 EN_DDX_K.indb 47 10/12/20 18:36 10/12/20 18:36