beautypg.com

Power supply, Setting up the device, Connecting the transmitter – Kompernass WELLTECH WT 40458 User Manual

Page 8

background image

- 6 -

Composite video signal (CVBS)

CVBS (colour, video, blank and sync),

generally called composite video,

refers to a normal video connection

(VIDEO). The video signal is carried

by a CINCH cable, generally labelled

in yellow.
SCART (EURO-SCART)

Abbreviation for Syndicat des Con-

structeurs d´Appareils Radio Recep-

teurs et Televiseurs. This is a French

association for the radio and television

industry. The connector is standardised

21-pin plug that is used between the

television set and connected compo-

nents, for example.
AV socket

Abbreviation for audio/video socket.

Interface for transmitting sound and

image signals (see SCART, CINCH).
Video signal

Electrical information that results in

conversion of a real image into an

electronic signal. The video signal

has precisely defined properties and

meets the currently applicable standard

for video transmission.
Frequency

Number of oscillations or repetitions

of a signal per second, measured in

Hertz (Hz).

Power supply

The included connector power packs

were certified by TÜV Rheinland. They

are intended for operation on a 230V~/

50Hz mains network.

Setting up the device

First remove all device components from

the packaging and remove all packing

foil and tape.

Important notice:

Even when the system (transmitter +

receiver) is switched off, the manufac-

turer still recommends disconnecting

the connector power pack from the

power network or using a power strip

with a shut-off switch. Only this way

can it be ensured that the device is

completely powered down in the in-

terests of economical use of power.

Before starting up the device, please

remove the notice from beneath the

audio/video antenna.

Connecting the transmitter

Note:

Select a transmission source.

• SAT receiver/set top box

• DVD/CD player

• VCR

• PC, etc.

You can transmit video and audio

signals from the selected transmission

source.

Connecting the transmission source to

the transmitter:

Connect the SCART double adapter (

1(

)

with a CINCH (RCA) cable (2!).

Connect the CINCH (RCA) cable (

2!

)

with the transmitter (e).