Kenwood DVF-3400 - Manual (Page 16)

P
repar
a
tions
16
English
Preparation for Set Up
POWER
POWER
1 Press the [POWER] key to power on.
2 Set Video Format according to the connected TV
type. (Refer to "To select TV Type" on page 9.)
• If the video formats of the disc and TV do not match, press and
hold [ 8] key for more than 5 seconds to be able to select a TV
type (PAL, NTSC or AUTO). (No disc inserted)
Note:
When the power cord is plugged, wait for several seconds, and
then switch the power on.
Set up menu
By using the Setup menu, you can make various adjustments to
items such as picture and sound.
You can also set a language for the subtitles and the Setup
menu, among other things. For details on each Setup menu
item, see pages 17 to 19.
SETUP
ENTER
Set Up functions
To display and exit the Menu To display and exit the Menu
1 Press [SETUP] key to display the menu. A second
press of [SETUP] key will take you back to initial
screen.
To go to the next level:
Press the Cursor right [
3 ] key.
To go back to the previous level:
Press the Cursor left [ 2 ] key.
General Operation General Operation
1 Press [SETUP] key.
• The Setup menu appears.
2 Use the Cursor up/down [5/∞] keys to select the
desired option, then press the Cursor right [
3]
key to move to the second level.
• The screen shows the current setting for the selected item, as
well as alternate setting(s).
3 Use the Cursor up/down [5/∞] keys to select the
second desired option, then press the Cursor
right [
3] key to move to the third level.
4 Use the Cursor up/down [5/∞] keys to select the
desired setting, then press [ENTER] key to confirm
your selection. Some items require additional
steps.
5 Press [SETUP] key or [£] key to exit the Setup
menu.
3400_EN.indd 16 07.3.26 11:30:22