Kenwood DPF-J7020 - Manual (Page 17)

17
DPF-J7020 (EN)
Programming tracks in desired order (PGM mode)
SPACE
/CHECK
G P 0 M E 1 D D 0 2 D 0 0 T 3
G P 0 M E 1 D D 0 2 D 0 0 T 3
To check the programmed tracks
÷ Each time the key is pressed, the program No. and the disc No. are
displayed.
÷ The previous display resumes in a few seconds.
To add a track to the program
Perform steps
2 and 3 of “Programming tracks in
desired order”.
^
To change a track in the program
1Set the CD player to stop mode.
2Press the CHECK key.
3Perform steps 2 and 3 of “Programming tracks in
desired order”.
^
÷ When a track No. is entered, the track will be added to the end of the
existing program.
÷ Press the CHECK key repeatedly until the program No, to be changed
is displayed.
÷ Press it while the “PGM01” indicator blinks.
÷ The track being played cannot be changed.
Example
≠
To clear tracks from the program
To clear tracks from the end To clear all tracks
÷ When the P.MODE key is pressed during playback, playback in order of
tracks starts from the track being played.
÷ Each time the key is pressed, the last track in the program is cleared.
÷ The tracks which are programmed earlier than the track being played
cannot be cleared.
CHARA.
/P.MODE
SPACE
/CHECK
DELETE
/CLEAR