Konica Minolta Magicolor 2480 MF - Manual (Page 17)

13
Connectivity
The magicolor 2480MF and 2490MF provide the following interfaces:
magicolor 2480MF magicolor 2490MF
10/100BaseTX Ethernet Optional Standard
Hi-Speed USB 2.0 Standard Standard
USB 1.1 Host Port Standard Standard
10/100BaseTX Ethernet—The built-in 10/100BaseTX Ethernet
autosensing interface on the magicolor 2490MF operates on both
10 Mbps LAN and 100 Mbps Fast Ethernet networks. It provides
printing and scanning functionality over TCP/IP for Windows Server
2003/XP/2000/Me/98SE.
The silex technology SX-1000U 10/100BaseTX Ethernet Device
Server is available for the magicolor 2480MF. This autosensing
external network interface card operates on both 10 Mbps LAN
and 100 Mbps Fast Ethernet networks, and it supports printing and
scanning over TCP/IP for Windows XP/2000.
Hi-Speed USB 2.0—This “Plug and Play” interface provides a
4-pin Series B connector and runs at speeds up to 480 Mbps.
USB 1.1 Host Port—This interface for Camera Direct Photo
Printing is conveniently located on the front of the magicolor
2400MF Series all-in-ones.
Resolution
Print
2400 x 600 dpi—For the best print quality, choose 2400 x 600
dpi. This resolution is perfect for everything from text and line art
to clip art and photographs. It provides clean text, great detail and
character in fine lines and halftones, and rich, solid colors.
1200 x 600 dpi—The default print resolution is fine for general
business documents that include text and graphics.
600 x 600 dpi—When printing drafts and disposable documents,
select 600 x 600 dpi resolution.
Increasing or reducing print resolution does not affect the speed of
the engine or significantly affect the amount of toner used for printed
output. The magicolor 2480MF and 2490MF print at full speed
regardless of the print resolution chosen, and they provide a low cost
per page even at the highest print quality selections.
Print quality is further enhanced at all resolutions by the use of Simitri
Polymerized Toner technology.