Kenwood KDV-MP3346 - Manual (Page 9)

9 ENGLISH
1
Enter Function Control settings.
2
Select “TUNER CTRL.”
Listening to the radio
~
] “TUNER”
Ÿ
] “F1,” “F2,” “F3,” or “AM”
!
“ST” lights up when receiving an FM
stereo broadcast with sufficient signal
strength.
You can select or set the settings while listening to the radio.
Item Selectable setting, [ Initial ]
SEEK MODE
Tuning mode Selects the tuning mode for
4 / ¢ buttons.
• AUTO1
• AUTO2
• MANU : Automatically search for a station.
: Search in order of the stations in the preset memory.
: Manually search for station.
A-MEMORY
Automatic
presetting You can preset up to 6 stations for each FM and AM band.
• START * 1
• CANCEL
: Automatically search for stations and stored in to the memory.
“A-MEMORY” flashes on the display during search.
: Returns to item selection menu.
CRSC SET * 2
Clear Reception
Stereo Control
setting
• ON * 3
• OFF
: Improve the FM reception, (but the stereo effect may be lost).
: Cancels. The stereo effect may be restored automatically
(depending on the reception condition).
* 1 All previously stored stations are erased and stations are stored anew. The station stored in the lowest
preset number will be automatically tuned in.
* 2 Displayed only when the source is “TUNER (F1 / F2 / F3).”
* 3 Strong electrical fields (such as from power lines) may cause unstable sound quality when is
set to . In such situation, set to .
3
Turn the control knob to make a
selection, then press to confirm.
See table below for selection.
4
Finish the procedure.
[Hold]
EN02-11_KDV-MP3346M[U]f.indd 9 EN02-11_KDV-MP3346M[U]f.indd 9 11/26/09 4:02:27 PM 11/26/09 4:02:27 PM