Kenwood DVR-5070 - Manual (Page 49)

49
DVR-5070 (EN)
Operations
Register the setup codes for your audio and video
Control of a different device with the accessory remote controller
The devices which can be set up are VCR SAT (satellite tuner), TV, and CABLE TV).
Operating other devises
1 Press one of devises key for
operate.
2 Press DEVICE
. key to de-
vise power on.
3 Press devise operate key.
1 Press one of the devises key for more
than 2 seconds
2 Use the numeric keys to enter the
setup code.
The LED on the remote
control unit lights.
÷ The LED goes out when the code is not correct or not
recognized.
÷ When the setup code has been recognized, the LED
flashes 3 times and setup is completed.
Refer to the code table and enter the 4-digit setup code
while the LED on the remote control unit is lit. (
p)
(Keys which can be used to
operate connected devices
E)
3Press DEVICE (
) key, CH +/- keys
or numeric keys to test the code.
If the code is acceptable, your devices
work as it is.
1 2 3
4 5 6
7 8
0
9
CLEAR P.MODE
DVD CD
FRONT TV CABLE
RADIO VCR SAT
BAND
DEVICE
DVD CD
FRONT TV CABLE
RADIO VCR SAT
BAND