Kenwood eXcelon KDC-X759 - Manual (Page 33)

Makes the sound different for the front channel and rear
channel.
Display Setting
"Zone 2 OFF" Both the front and rear are Auxiliary input sound.
"Zone 2 ON" The front is this unit's internal source, and the
rear is Auxiliary input sound.
• When the Dual Zone System is ON, there is no rear channel audio
control or other effect.
• When the Dual Zone System is being used the front channel can't
be used with External disc source.
• When you set the Dual zone system to ON while the non-fading
preout is switched ON, the sound of the non-fading preout isn’t
output.
Dual Zone System
Toggles ON or OFF the mute control on the built-in amplifier.
Turning ON this control enhances the preout quality.
Display Setting
"Builtin AMP Mute OFF"/
"AMP Mute OFF" The built-in amplifier activates.
"Builtin AMP Mute ON"/
"AMP Mute ON" The built-in amplifier deactivates.
Built-in Amp Mute Setting
Setting display/don't display for the System Q factors (Bass
center frequency, Bass Q factor, Bass extend, Middle center
frequency, Middle Q factor, and Treble center frequency) in
Audio control.
Display Setting
"System Q ON" The System Q factors are displayed.
"System Q OFF" The System Q factors aren't displayed.
System Q
Setting the time until the faceplate hide operation starts after the
power is turned OFF.
The faceplate can be removed only during the set time period.
Display and Setting
"Off Wait 0sec"
"Off Wait 3sec" (Original setting)
"Off Wait 25sec"
…
…
OFF Wait Time Setting
— 33 —
KDC-X859_U.S_r1 01.12.10 9:40 AM Page 33