Kenwood eXcelon KDC-X759 User Manual
Page 17
Prevents tampering with the unit while your car is being serviced
etc.
Hiding the control panel
Press the [SRC] button for at least 1 second.
The faceplate slides open.
When the time set in
the faceplate is hidden and the power turns OFF.
Showing the control panel
Press the left part at the upper side of the faceplate.
The faceplate will open and show the control panel.
Hiding the Control Panel
• When the faceplate is kept remove open, according to the Wait Time Setting> (page 33) setting, the faceplate is hidden and • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in • Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much Reattaching the Faceplate 1 Set the left side of the faceplate in the faceplate bracket. 2 Press the right side of the faceplate until it locks. The faceplate of the unit can be detached and taken with you, Removing the Faceplate 1 Turn the ignition OFF or press the [SRC] button for at least 1 2 Holding the center part of the faceplate pull it out. Theft Deterrent Faceplate Press the [ANG] button for at least 1 second. Do not apply excessive force to the faceplate. It can cause damage. Faceplate Angle Adjustment — 17 — Turning the Non-fading output ON or OFF. Press the [NF] button for at least 1 second. Non-fading Output KDC-X859_U.S_r1 01.12.10 9:40 AM Page 17
the power turns OFF.
its special storage case while detached.
dust or the possibility of water splashing.
helping to deter theft.
second.
The power turns OFF and the faceplate slides open.
Each time the button is pressed Non-fading output switches ON
or OFF.
When it’s ON, "NF ON" is displayed.