Kenwood KRC-566 - Manual (Page 17)

ANT.
CONT.
P.CONT FRONT • L
FRONT • R
REAR • L
REAR • R
– +
— 17 —
FM/AM antenna input 1
Rear left output (White) 23
Rear right output (Red) 28
Fuse (10A)
24
2 KENWOOD disc changer control input
Wiring harness
(Accessory1)
25
29
White/Black
32
Gray/Black
38
Purple/Black
White
31
Gray
34
Green
37
Purple
40
To front left
speaker
30
To front right
speaker
33
To rear right
speaker
39
To rear left
speaker
36
Ignition wire (Red) 20
Battery wire (Yellow) 21
Ground wire (Black) · (To car chassis) 22
Ignition key
switch
10
Car fuse box
(Main fuse)
11
ACC 13
Car fuse
box
14
Battery 12
If no connections are made, do not let the wire come out from the tab. 4
Front left output (White)
(KRC-566 only)
26
Front right output (Red)
(KRC-566 only)
27
To connect the Disc changer,
consult your Disc changer
manual.
3
Connecting Wires to Terminals
35
Green/Black
Power control wire (Blue/White) 15
Motor antenna control wire (Blue)
17
5 When using the optional power amplifier,
connect to its power control terminal.
7 Depending on what antenna you are using,
connect either to the control terminal of the
motor antenna, or to the power terminal for
the booster amplifier of the film-type antenna.
KRC-566(M)_U.S r1 02.9.26 4:28 PM Page 17