Keys Fitness KPS-2000 - Manual (Page 5)

ASSEMBLY
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Z
STEP 2
Attach Right Base Frame for Weight(16) and Left Base Frame for
Weight(30) to Base Frame(1) and secure using:
2 x (121) Bolt 4 x (125) Washer 2 x (126) Nylon Lock Nut
Slide Guide Rods (18) down into Right Base Frame for Weight (16) and
slide on the following:( same as the other side )
2 x (84) Weight Stack Bumper 5 x (19) 15 lb plate
9 x (20) 10 lb plate 5 x (21) 5 lb plate
1 x (25) Top Plate 1 x (17) Top Frame for Guide Rod
Secure Guide Rods (18) to Right Top Frame for Guide Rod (17) and Left
Top Frame for Guide Rod (31) then connect to Main Top Beam (4) using:
2 x (121) Bolt 4 x (127) Spring Washer
8 x (125) Washer 4 x (130) Bolt
2 x (126) Nylon Lock Nut
1
25
19
20
21
STEP 2
130
125
17
138
126
127
125
4
18
46
126
84
16
125
18
25
138
46
21
20
19
84
121
30
121
125
121
130
127
125
31
125