Kenwood DVF-3080 - Manual (Page 26)

26
DVF-3080/DVF-8100 (EN/K,P,E,X,Y)
Operations
Program play
You can listen to the desired tracks of the current CD or VCD in any desired order.
Program Edit
1
Insert a disc and close the tray.
Program edit screen appears.
4
You can select maximum 99 values by repeating
step
2 - 3.
5
Select the track you want to start playing on
the Program list. ÷ MP3/WMA program playback ⁄
÷ The unit stops when the STOP (7) key is pressed. To restart
program play, press the PLAY key.
2
Select specific track by Press Cursor up/down
(
5/∞) keys.
3
Press P.MODE key to register selected value
onto Program list.
Or select "
" (add) icon on the screen to
register selected value onto Program list,
then press the ENTER key.
To repeat program play
During program playback, press the REPEAT
key on the remote.
Each press the key switches the mode.
1 "TRACK" : repeats the current track.
2 "ALL" : repeats all the tracks on programmed list.
3 Goes off (repeat off)
Program list Track list
Example of CD playback
: Add icon
: Add all icon
: Delete icon
: Delete all icon
You can add all tracks in the disc. Select “ ” (add all)
icon then press ENTER key.
6
Press PLAY key or ENTER key to start.
or
Playback begins in the order in which you programmed
tracks. Playback stops after all of the tracks on the
Program list have played once.
P.B.C. on mode of VCD, the Progam play function
does not work.
^ Note Note
If you press SKIP (
¢) once during Repeat Track
playback, the repeat playback cancels.
Note Note
or