Samsung SPH-N400 - Manual (Page 45)

Section 2: Understanding Your Phone
2D: Controlling Your Roaming Experience 44
ᮣ
Though callers can leave voicemail messages while you are
roaming, you will not receive notification until you return to the
Sprint Nationwide PCS Network. While roaming, you should
periodically check your voicemail box for new messages by dialing
1+area code+your PCS Phone Number. Press
when you hear
your greeting and enter your pass code at the prompt.
ᮣ
There are security and privacy risks (eavesdropping and cloning)
that exist with conventional analog services today.
ᮣ
Your battery needs recharging sooner when you use your phone for
analog roaming.
Note: If you’re on a call when you leave the Sprint Nationwide PCS
Network and enter an area where roaming is available (whether digital or
analog), your call is dropped. If your call is dropped in an area where you
think PCS Service is available, turn your phone off and on again to
reconnect to the Sprint Nationwide PCS Network.
Note: When using your phone in analog mode, the handset may feel warm.
This behavior is normal for analog operation.
Setting Your Phone’s Roam Mode
Your PCS Phone allows you to control your ability to roam. By using the
Roaming menu option, you determine which signals your phone
accepts.
Set Mode
Choose from three different settings on your Tri-Mode phone to control
your roaming experience:
1. Press for Main Menu .
2. Press for Settings .
3. Press for Roaming .
4. Press for Set Mode .
5. Press the navigation key up or down to select Automatic , Analog , or
Sprint PCS .
6. Press to Save .