Konica Minolta Magicolor 2400 - Manual (Page 88)

Dust Cover 82
Dust Cover
The dust cover is a standard printer feature in the Americas, but an optional
accessory in other areas.
Contact your vendor or go to printer.konicaminolta.com for purchase informa-
tion.
When the dust cover is attached to Tray 1, the media is protected from dust,
and operating noises from printing are reduced. We recommend that the dust
cover remain attached when this printer is used.
"
Depending on the sales region, the dust cover is not included with this
printer. If necessary, purchase this part from your sales representa-
tive.
Installing the Dust Cover
1
Open Tray 1.
2
Install the dust cover.
UG2400W_UK.book Page 82 Thursday, November 11, 2004 12:16 PM