Konica Minolta Magicolor 2400 - Manual (Page 76)

Solving Problems with Media Misfeeds 70
Media is
misfeeding.
Envelopes are facing
the wrong way in Tray
1. Load the envelopes in Tray 1 so the
flaps are facing down.
If the flaps are on the long edge, load
the envelopes with the flap toward the
left of the printer.
Transparencies have
collected static elec-
tricity in the tray. Remove the transparencies and load
them in Tray 1 one sheet at a time. Do
not fan transparencies before loading
them.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used. Use KONICA MINOLTA-approved
media.
See “Media Specifications” on page 20
for supported size.
The media feed roller
is dirty. Clean the media feed roller.
For more details, refer to “Interior” on
page 55.
Symptom Cause Solution
UG2400W_UK.book Page 70 Thursday, November 11, 2004 12:16 PM