Keys Fitness CG2 - Manual (Page 10)

10
Console Instructions
Take a few moments to review the console layout. Below is a overview of the console keys and
their different functions.
BUTTON OVERVIEW
START -
Press to enter Quick Start Mode. In Pause Mode, used to resume exercise session..
ENTER/SCAN -
In Program Mode, used to confirm the values you set.
During exercise, pressed once, will place the main console window in Auto Scan Mode. The
display will change every four seconds from TIME/DISTANCE/SPEED/STRIDES PER MIN to
CALORIES/PULSE/LEVEL/CAL/HR. To exit Auto Scan Mode and enter Manual Scan Mode, Press
and Hold button for two seconds. Console will beep twice. Manual Scan Mode allows you to
toggle display from TIME/DISTANCE/SPEED/STRIDES PER MIN to CALORIES/PULSE/LEVEL/CAL/
HR by pushing the ENTER/SCAN button. To return to Auto Scan Mode, Press and Hold button
for two seconds. Console will beep twice to confirm switch.