Kawai ES3 - Manual (Page 26)

– 26 –
13. CHANNEL MUTE
This determines which MIDI channels are activated to receive when used with Multi-Timbral On.
You can activate or deactivate each of the 16 channels individually.
After selecting the “Channel Mute” function by pressing the Choir/
Pad button, press one of the 16 left most white keys to select the
desired channel. Then use the Value buttons to turn them on and off.
NOTE:
When the Multi-Timbral mode is set to off, the “Channel Mute” function is not available.
14. LOWER PEDAL ON/OFF
This determines if the sustain pedal will be active for lower sound when in Split mode. The default
setting is Off which means the sustain pedal is not active the lower sound.
After selecting the “Lower Pedal” function by pressing the Bass
button, use the Value buttons to turn it on and off. The LED display
shows whether Lower Pedal is on or off.
FACTORY RESET
If you want to recall the original factory settings, turn the power off and then turn it back again
while holding down both the Touch and Transpose buttons at the same time.
Channel 1