Kyocera KM-C2230 - Manual (Page 74)

4.3 Queuing a Copy Job for the Multiple Bypass Tray 4
4-11
Us
efu
l O
p
e
ratio
ns
Ch
apte
r 4
7
After the message “Place paper in the By-
pass Tray.” appears, replace the paper
loaded into the multiple bypass tray with pa-
per of the size and type specified in the
screen.
The copies are printed.
8
After the copy job using the “Bypass Reser-
vation” setting is finished, reload the paper
that was removed from the multiple bypass
tray.
✎
Additional Information
If scanning of the document is finished before pa-
per is loaded into the multiple bypass
tray, appears in the Basic screen. Howev-
er, after the paper is loaded into the multiple by-
pass tray, disappears and printing begins.