Keys Fitness Keys 9000OB - Manual (Page 9)

Console Panel Functions
9
There are several display windows on the control panel to provide feedback information. Refer to Figure 3.
CENTER INFORMATION WINDOW: (Long rectangular box near bottom of console) Provides user infor
mation before starting. After starting indicates INCLINE, TIME and SPEED or PACE.
INCLINE: Indicates incline in percent of grade in .5% increments (0%-15%).
TIME: Indicates elapsed time after pressing START in minutes and seconds(0-99 minutes, 0-59 seconds).
SPEED: Indicates MPH in .1MPH increments (.6 MPH to 12MPH). During operation the MODE button
will toggle this window between speed and pace.
PACE: Indicates amount of time required to complete 1 mile at current speed. During operation the
ENTER MODE button will toggle this window between SPEED and PACE.
ENTER MODE: Used for programming functions.
DISTANCE: Indicates miles traveled in .01 mile increments up to 9.99 and .1 mile increments above 10
miles.
CALORIES: Indicates estimated calories burned based on 150 lb. person at the indicated speed, incline, and
time. During operation the ENTER MODE button will toggle this window between calories or pulse.
PULSE: Indicates pulse rate. PULSE will not register unless you have both hands on the handgrips. During
operation if PULSE is activated INCLINE will only show when adjustments are made.
DOT MATRIX: In manual mode, indicates Lap Counter in 1/4 mile increments. In program mode, indicates
progress of program as a blinking diode and shows program profile.
ENTER PROGRAM: Used to scroll between pre-set and user programs.
PROGRAM UP/ PROGRAM DOWN: Scrolls program levels 1-9, with 1 being the easiest and 9 being the
most difficult.
START/STOP: Starts the treadmill after a 3 second delay. Stops the treadmill when it is in operation.
INCLINE+/-: Adjusts the percent of incline during programming or use. Also can be used during program-
ming to scroll through programs.
INCLINE 2-10: One Touch buttons to change percent of grade from 2%-10%. For incline greater than 10%
use the UP button.
STOP: Stops the motion of the treadmill at any point during operation. Also used as a Pause function, retain-
ing information in all windows unless safety key is removed.
SPEED 2-10: One touch buttons to change speed in 1MPH increments from 2-10MPH. For speeds greater
than 10MPH use the Speed + button.
SPEED +/-: Adjusts the speed in .1 MPH increments during programming or use.
HEART RATE MODE: Used to select heart rate program.
HEART RATE TARGET UP: Scrolls through heart rate programs
HEART RATE TARGET DOWN: Scrolls through heart rate programs