Dtmf dialing – Samsung SCH-470 User Manual
Page 29
56
57
Useful
Features
Useful
Features
6. Press STO.
The phone will beep and the
message
-ALARM-
will be
displayed at the appointed
time.
To stop a beep tone, open/
close the cover, or press any
button. Otherwise the beep
tone will stop automatically
after 3 minutes.
If you turn the phone off, then on when alarm is set:
If the alarm time is appointed...
Alarm setup...
At the current time mode
Remains to be on.
Using time duration (in minute) mode
Cancels.
To Release Alarm
1. Press:
FCN
followed by
Numeric buttons 3 and 2.
R e l e a s e
A L A R M ? Y E S
INUSE
FM CDMA
SVC
3. Press
or
to choose 'YES'.
4. Press STO.
2. Press numeric button 2 to choose
'
Release
'.
6
1
1
1
3
1. After you call the service, press RCL
when the service asks to enter the
DTMF code.
R c l : 0 1
1 2 3 4 5
INUSE
FM CDMA
SVC
2. Enter the location number to be
dialed.
Example:
Credit card number
Password
Result: The number stored in the
location is displayed.
3. Press:
FCN
followed by
SEND
This feature allows you to utilize additional phone
services, such as accessing an alternate long distance
network, signaling pager, or banking by phone. The
following two features will make it easier to send
DTMF tone.
If
SILENT
is displayed, turn on the keytone. See 'Turning
Tones On and Off' on page 45.
Using Memory
If you want to use this feature, store the numbers
(ID code, credit card number, etc) in a memory
location.
DTMF Dialing
1
3
3