Kenwood DV-705 - Manual (Page 36)

36
DV-705/DVF-R5070 (EN/K,P,E,Y)
Operations
Using the On-screen banner display Program play
Release Program play
In following case, Program play would be released.
1. When you open and close tray.
2. When you turn power off and on.
6
You can select maximum 19 values by repeating
step
2 - 5.
MULTI CONTROL
ENTER
7
Press the play/pause (
6)key on the remote
or play (
3) key on the main unit to start pro-
gram play.
6
To stop program play
Press the stop (
7) key.
7
Delete Program
÷ Program playback will start from the selected program.
÷ Playback will stop when the end of the program is
reached.
5
Press Cursor up/down (
5/∞) keys to select
track, then press ENTER key.
track No.
÷ When the STOP key is pressed, the player will
stop with the program contents stored.
÷ When the play/pause (6)key or play (3) key
is pressed, normal playback will start.
÷ To restart program playback, press the P.MODE
key to display the program screen and then press
the play/pause (
6)key or play (3) key.
Select "Delete" or "Clear" in step
2 of "Program
Edit".
Program playback will start from the
selected program.
Playback will stop when the end of the
program is reached.