Kenwood DV-705 - Manual (Page 21)

DV-705/DVF-R5070 (EN/K,P,E,Y)
Set Up functions
21
Preparations
3 Press Cursor up/down (5/∞) keys on the remote
to select "Digital Output", then press the Cursor
right (
3) key to access the sub features
1 During stop mode, press MENU key on the re-
mote.
2 Press Cursor up/down (5/∞) keys on the re-
mote to select the "Audio" icon, then press
Cursor right (
3) key.
4 Press Cursor up/down (5/∞) keys on the remote
to select specific output mode, then press the
ENTER key.
MENU
MULTI CONTROL
MULTI CONTROL
Select Audio Output
5 Press Cursor left (2) key on the remote to return
to previous menu.
6 Press the MENU key to return to previous display.
MULTI CONTROL
ENTER
"Audio" icon
MENU
MULTI CONTROL
MULTI CONTROL
MULTI CONTROL
Please refer to pages 16 to 18 for setup.
3 Press Cursor up/down (5/∞) keys on the remote
to select "LPCM Output", then press the Cursor
right (
3) key to access the sub features
1 During stop mode, press MENU key on the re-
mote.
2 Press Cursor up/down (5/∞) keys on the re-
mote to select the "Audio" icon, then press
Cursor right (
3) key.
4 Press Cursor up/down (5/∞) keys on the remote
to select specific output mode, then press the
ENTER key.
MENU
MULTI CONTROL
MULTI CONTROL
Select LPCM Output
48kH : Even in case of 96 kHz digital signal, DVD will
deliver 48 kHz signal out.
96kH : In case of 96 kHz digital signal, DVD will de-
liver 96 kHz signal out. In this case your re-
ceiver should control 96 kHz signal.
5 Press Cursor left (2) key on the remote to return
to previous menu.
6 Press the MENU key to return to previous display.
MULTI CONTROL
ENTER
"Audio" icon
MENU
MULTI CONTROL
MULTI CONTROL
MULTI CONTROL