Kambrook DURAGLIDE KI820 - Manual (Page 11)

11
Anti Drip System
The Kambrook DuraGlide™ Anodized
Iron is equipped with an Anti-Drip
System. The iron will automatically
close the steam valve when the
soleplate temperature is too low to
produce steam. When this happens
you will hear a click sound. It is safe
and will not harm the performance of
the iron.
This is the reason the fine mist spray
should be used when ironing delicate
fabrics at low temperatures.
The steam valve will open once
the soleplate has reached the
temperature required to create
steam.
Safety Auto-Off
The Safety Auto-Off feature is
designed to switch the iron off if
forgotten.
When the iron is left in the upright
position it will shut off after
approximately 8 minutes, followed by
six beeps.
When left in the ironing position it
will switch off after approximately 30
seconds, followed by six beeps.
Once the iron has shut itself off, the
indicator light will blink to indicate
that the iron has switched off.
To reactivate the iron, simply move
the iron. The heating indicator light will
switch on when the iron has reached
the temperature selected on the
temperature dial.
CAuTION: Safety Auto-
off is designed as a
safety feature only.
Irons should not be left
switched on deliberately
while unattended. If
safety Auto-Off has
activated and no further
ironing is required, we
recommend that the
iron is switched off at
the power outlet and
unplugged.