Troubleshooting and support, Picture frame problems, 5 troubleshooting and support – Kodak EasyShare M1020 User Manual
Page 35
www.kodak.com/go/support
29
5
Troubleshooting and support
For step-by-step product support, visit
nd
select Interactive Troubleshooting & Repairs.
Picture frame problems
If...
Try one or more of the following
Frame does not
turn on.
■
Make sure the power cable that was included with your frame is
connected securely (see
).
■
Unplug the power cable from the frame. Wait 5 seconds, then
reconnect the cable. Press and hold the power button (for about 2
seconds), then release.
Nothing happens when
a memory card, camera,
or USB device is
connected.
■
Insert a certified SD/MMC/MS/xD/CF/MD card with images into the
designated card slot, then push to seat it (see
). In the top
card slot, make sure the card is seated flush with the top.
■
Make sure the USB cable that was included with your camera or USB
device is connected securely (see
).
■
Make sure the file format of your pictures and videos are supported.
(See
).
NOTE: A large picture file may take time to appear.
Touch border doesn’t
work.
■
Use your finger to make your selections on the touch-sensitive
borders (see
). Lights on the border show you where to
touch.
IMPORTANT: Do not slide on the right border (tap only).
■
Unplug the power cable from the frame. Wait 5 seconds, then
reconnect the cable. Press and hold the power button (for about 2
seconds), then release.
Frame freezes up.
■
Unplug the power cable from the frame. Wait 5 seconds, then
reconnect the cable. Press and hold the power button (for about 2
seconds), then release.