Kodak EasyShare M1020 - Manual (Page 12)

6 www.kodak.com/go/support
Getting started
Turning off your frame
■ Standby mode—Press and hold the power
button (for about 2 seconds), then release.
■ Power off—Unplug the power cable.
Changing your frame orientation
Change the frame orientation setting if you change to portrait orientation.
Change the stand position and angle:
■ Rotate the stand 90 °, then pull it out or push it in to adjust
the frame angle.
NOTE: When displayed with the stand extended, the frame rests at a
68-90
°
angle.
Change the frame orientation setting:
1 Tap (Home)
→
(Settings).
2 Slide to highlight (Viewing options), then tap
OK.
3 Slide to highlight Frame orientation, then tap OK.
4 Slide to highlight Portrait, then tap OK
5 Tap to exit.
Your frame is set up now to display pictures in portrait
orientation.