Sharp AR-275 - Manual (Page 45)

SORT/GROUP
43
3
S
P
E
C
IAL FUNCTIONS
2 Press the OUTPUT key.
● The output mode selection screen will appear.
3 Use the and keys to select the desired output mode and press the
OK key.
● Also the OUTPUT key can be used to select an output mode.
4 Make all other desired copier selections and press the START key.
● If originals have been set in an optional SPF or RSPF in step 1, copying will start. If an
original has been set on the platen glass, proceed to the next step.
5 Replace the finished original with the next original and press the
START key after it lights up. Repeat this step until all originals have
been scanned.
● If the non-sort mode has been selected in step 3, copying will start each time the START
key is pressed.
SORT
NO SORT
SORT
GROUP
3
1
2
1
1
1