Sony HMZ-T1 - Manual (Page 23)

23
Guide of HDMI device control
Displays the operation guide for head mounted unit buttons that can be used with “Control for
HDMI” function (page 22).
Power off when
unmounted On: Turns the system off automatically 30 minutes after you
take the head mounted unit off.
Off: Deactivates this function.
• Regardless of this setting, the screens will go off automatically
10 seconds after you remove the head mounted unit.
Illumination On: Activates the illumination on the head mounted unit.
Off: Deactivates this function.
Language setting Sets the language used for menus and other interface elements.
• Audio is muted while this setting is configured.
• The volume cannot be adjusted while this setting is configured.
Prolonged viewing
warning On: Activates automatic display of a warning about whether to
turn the power off after 3 hours of continuous viewing.
Selecting “Yes” on the warning screen will turn the power
off. Selecting “No” will cause the power to be turned off
3 hours later, after 6 hours of continuous viewing.
Off: Deactivates this function.
• When the warning is displayed after 3 hours of viewing, if no response
is made in 90 seconds, the power will automatically be turned off.
• A warning screen will be displayed at 30 minutes and 5 minutes before
the system will turn itself off.
Startup viewer
warning On: Activates automatic display of a startup warning.
Off: Deactivates this function.
Reset to factory
settings Resets all settings to the original default values.
• The password set in “Set password” (in “General Setup”) will also be
cleared.
Tip
Notes
Notes
Note