Security Systems 808 User Manual
Page 9
496336 Issue 1
9 of 22
4.
Press 0.
The display shows:
0:INST PROG
5.
Press Enter.
The display prompts you to remove the end station lid:
REMOVE LID
6.
If the end station Tamper Switch is already open, close and open it
again.
You have now reached the Installer programming
mode. The display shows:
00-PROG SYSTEM
Finding Menu Items
The 808 programming is divided into sets of numbered menus. Each menu
starts with a two digit number. The menus are grouped together into the
following categories:
Menu No
Category
00
Start point for Installer programming.
01, 04, 09
Software version, Testing, and Printing.
10, 11
Account Name.
20, 21
Zone circuit type.
31 - 32
Zone and Area Programming.
40 - 47
Level and keypad Programming.
50 - 53
Output Programming.
60 - 67
System Options.
For a complete list of Menus and options see the next two pages.
808
Finding Menu Items