Security Systems 808 - Manual (Page 2)

2 of 22 496336 Issue 1
Introduction
The 808 is a programmable Alarm System suitable for domestic or small
commercial premises.
The system comprises an end station in a shielded case, and up to four
separate keypads. The end station provides:
• Connections for up to eight Fully Supervised Loop (FSL) or Closed
Circuit zones (selectable during programming).
• Three outputs, two fully programmable.
• Pins for fitting a plug-on communication device. Any device that
complies with the Scantronic plug-on footprint can be fitted.
The installer can program the system from the keypad, which provides an
eight character Liquid Crystal Display (LCD). The programming interface is
arranged into a set of numbered menus that lead the installer through the
installation process.
The 808 software provides a flexible installation that can meet many different
needs. The system can provide for up to 8 identified users. The 808 allows
users to set the system to four different security Levels (for example full set
and three part sets) which can be programmed by the installer. Individual
zones can be programmed as Flexi-Zones™, which change behaviour
depending on which security Level is set.
The 927 LCD Keypad
Figure 1. 927 Operator Controls and Displays
The 927 LCD keypad provides an eight character super twist LCD display, a
green Power LED, and four red Level status LEDs. The 927 also provides
terminals for one zone, in addition to those supplied by the end station.
8 Character Liquid
Crystal Display
Optional programmable
panic alarm keys. Press
keys 1 and 3 together
Optional programmable
control function keys.
Press keys 7 and 9
together.
Menu and Enter keys
Levels A to D LEDs
(Set or Unset)
Scroll and Level
setting keys
Edit Keys
Keyboard with
backlit soft rubber
keys
Power
808