Sanyo HT27547 - Manual (Page 16)

1 Connect a Component Cable to the VIDEO2 Green,
Blue, and Red video jacks.
2 Connect an Audio Cable to the matching VIDEO2
White and Red audio jacks.
3 Press INPUT to select Video 2 to view the program.
Note: Audio / Video Input (VIDEO2) and Component inputs share
the same audio (R/L) input jacks.
.
CONNECTING A DVD PLAYER
DVD PLAYER
GREEN, BLUE,
RED VIDEO
JACKS
DTV VIDEO2 AUDIO L/R
JACKS
16
OPERATING TIP:
Refer to the owner’s manuals and user’s
guides that came with your external equipment
for connection options.
VIDEO2 COMPONENT JACKS: Connection Option 2
HELPFUL HINTS (PROBLEMS/SOLUTIONS)
SYMPTOM CHECK THESE CONDITIONS TRY THESE SOLUTIONS
“No Signal” will appear randomly
on the screen when no signal is
detected at the video jacks. ● Check Audio / Video connections.
● Check external equipment
connections.
● Check external equipment
setting.
● Press the INPUT key.
● Switch on external equipment.
● Set external equipment output
connections to match input
connections.
If you continue to experience problems, please call toll free
1-800-877-5032. We can Help!
❶
❷
REMOTE CONTROL
❸
INPUT
Note: Set DVD Player output to 480i.