Shindaiwa EB212 - Manual (Page 9)

9
Eng
lish
a
ssembly
WARNING
Never perform maintenance or assembly procedures with engine
running or serious personal injury may result.
bloWer applIcatIon
Install Blower Pipes
Align grooves in straight pipe with pegs on blower housing and slide
pipe onto housing.
Turn straight pipe clockwise to lock into place.
Align grooves in fan head nozzle with pegs on straight pipe and slide
fan head nozzle onto straight pipe.
Turn fan head nozzle clockwise to lock into place.
1.
2.
3.
4.
o
peratIon
NOTICE: Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor
performance, or severe engine damage and void the product warranty. Read and follow instructions in the Storage
section of this manual.
fuel
WARNING
Alternative fuels, such as E-20 (20% ethanol), E-85 (85% ethanol) or any fuels not meeting Shindaiwa requirements
are NOT approved for use in Shindaiwa 2-stroke gasoline engines. Use of alternative fuels may cause performance
problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited
to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets,
carburetors and other engine components.