Errors while scanning, Symbology parameter defaults – Symbol Technologies 72E-86039-04 User Manual

Page 164

13 - 2 Symbol DS6708 Digital Scanner Product Reference Guide

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

Symbology Parameter Defaults

Table 13-1

lists the defaults for all symbologies parameters. There are two ways to change the default values:

•

Scan the appropriate bar codes in this guide. These new values replace the standard default values in
memory. To recall the default parameter values, scan the

Set Default Parameter on page 4-4

•

Download data through the device’s serial port using SSI. Hexadecimal parameter numbers appear in this
chapter below the parameter title, and options appear in parenthesis beneath the accompanying bar codes.
Refer to the Simple Serial Interface (SSI) Programmer’s Guide for detailed instructions for changing
parameters using this method.

NOTE

See

Appendix A, Standard Default Parameters

for all user preferences, hosts, and miscellaneous default

parameters.

Table 13-1

Parameter Defaults

Parameter

Number

Default

Page

Number