Samsung Ch@t CHT-350 - Manual (Page 27)

Dolby Pro Logic II is a new format for playing multichannel audio
signals that offers improvement over conventional Dolby Pro Logic.
It can be used to decode not only sources recorded in Dolby
Surround, but also regular stereo sources into five channels (front
left/right, center and surround left/right). In addition, various
parameters can be set according to the type of source and contents,
so you can adjust the sound field with greater precision.
Select the source you want to use. (CD, Video, FM/AM, Input
(L1, L2, L3, TV CH))
1 Press the SOUND MODE button.
• Press the SOUND MODE button repeatedly to select Dolby Pro
Logic II.
2 Press the SOUND EFFECT button.
• Each time you press the button, the sound effect changes as
follows.
3 Select the desired mode ("MUSIC, "MATRIX", or "MOVIE").
• Matrix: Use when playing sources recorded in monaural.
• Movie: Use this when viewing movies.
• Music: Use this mainly for music listening.
➢
◆ Dolby Pro Logic II may not be selected depending on the
disc used. (DTS DVD, Dolby Digital 5.1, VCD, MP3)
◆ When playing a DVD recorded in 2-channel Dolby Digital,
it will automatically be output in Dolby Pro Logic II.
◆ Dolby Pro Logic II operates only when CD, VIDEO,
FM/AM, or INPUT (LINE1, 2, 3 or TV Broadcast) is selected.
Mode, Sound Effect cannot be selected while the DVD
signal is being input.
Dolby Pro Logic II decoder
53
Speaker setup
1 Press the SPEAKER button.
• Each time you press the button, the speaker is selected in the
order of FL ➝ C ➝ FR ➝ SR ➝ SL ➝ SW ➝ VOL.
You will see this on the unit's display.
2 Use the + and - buttons to adjust the volume on the desired
speaker.
• The volume can be adjusted with in the range of -12 to 0 to +12.
1 Press the TEST button.
• Each time you press the button, the test tone will be heard
in the order of FL (Front speaker/L) ➝ C
(Center speaker) ➝ FR (Front speaker/R) ➝ SR (Surround
speaker/R) ➝ SL (Surround speaker/L) ➝ SW (Subwoofer).
2 To stop the test tone, press the TEST button again.
➢
You can adjust the speaker balance for the selected channel
using the Volume Control buttons during the test tone
operation.
52
To adjust the speaker balance
To test the speakers
2 3 1
5 6 4
8
0
9 7
SPEAKER SOUND MODE
SOUND EFFECT
STEP ZOOM
ATR
DIGEST
TEST
MODE
REPEAT 100+
ANGLE
TV VOL CH/TRK AMP VOL
1
2 3 1
5 6 4
8
0
9 7
SPEAKER SOUND MODE
SOUND
EFFECT
STEP ZOOM
ATR
DIGEST
TEST
MODE
REPEAT 100+
ANGLE
TV VOL. CH/TRK AMP VOL.
1
0 STEP ZOOM
ATR
REPEAT 100+
ANGLE
TV VOL. CH/TRK AMP VOL.
TV INPUT
DVD VCR FM/AM INPUT
TV
SELECT
2
2
2 3 1
5 6 4
8
0
9 7
SPEAKER SOUND
MODE
SOUND EFFECT
STEP ZOOM
ATR
DIGEST
TEST
MODE
REPEAT 100+
ANGLE
TV VOL CH/TRK AMP VOL
1
2 3 1
5 6 4
8
0
9 7
SPEAKER
SOUND
MODE
SOUND
EFFECT
STEP ZOOM
ATR
DIGEST
TEST
MODE
REPEAT 100+
ANGLE
TV VOL CH/TRK AMP VOL
2