Sunfire Subrosa SRS-210R - Manual (Page 9)

User's Manual
Amplifier Installation
Observe the following general
precautions and read the safety in-
structions on pages and 3 before
using your Sunfire subwoofer.
• The amplifier may be rack mounted
using the supplied rack ears. It will
fit into a standard 1U, 19 inch rack
space. Allow a minimum of 1 free
rack space above and below for
ventilation.
• The amplifier may also be placed
on a shelf, supported on its feet.
Make sure it is not placed on car-
peting or similar that may obscure
its ventilation openings.
• Never open the amplifier cabinet
as this might result in an electrical
shock to you, or damage to the
unit.
• Protect the amplifier and subwoofer
from prolonged exposure to direct
sunlight and other direct
sources of heat, such as heating
vents and radiators.
• To prevent fire or shock, do not
expose the amplifier or subwoofer
to rain or moisture. If fluid or a for-
eign object should enter either unit,
immediately turn off the power and
contact your Sunfire Dealer.
• Avoid excessive exposure to
extreme cold or dust.
• Do not place heavy objects on top
of the amplifier or subwoofer.
Heat rise
• Allow adequate ventilation around
the top and sides of the amplifier.
• Allow adequate ventilation if you
are rack-mounting the amplifier.
AC Power Considerations
Ensure that the amplifier is plugged into
an outlet capable of supplying the correct
voltage specified for your model.
Unplug your amplifier’s power cord
from the electrical outlet if it will be left
unused for a long period of time.
Route the power-supply cord so it is not
likely to be walked on or pinched by items
placed upon or against it, especially at
plugs, convenience receptacles, and the
point where it exits from the unit.
9