Sharp HT-SL50 - Manual (Page 16)

9
1
7
6
5
4
3
2
1
9
HT-SL50
E-15
2011 February 24
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production unit. There maybe some deviations
from these values in individual unit.
Specifications
Power source AC 120 V ~ 60 Hz
Power
consumption 25 W
Output power RMS: Total 100 watts
RMS:
Front Left/Right:
25 watts per channel into 4 ohms at
1 kHz, 10% total harmonic distortion
Subwoofer:
50 watts per channel into 8 ohms at
100 Hz, 10% total harmonic distortion
FTC:
Front:(Left/Right):
Minimum 24 watts per channel into
4 ohms at 200 Hz to 20 kHz, 1% total
harmonic distortion
Subwoofer:
Minimum 50 watts per channel into
8 ohms at 100 Hz, 1% total harmonic
distortion
Output
terminal HDMI™ output: (audio/video support to
1080p) x 1
Input
terminal Analog input (Audio in):
Stereo mini jack Ø 3.5 mm
HDMI input: (audio/ video support to
1080p) x 1
General
Type Full Range speaker system
7/8" x 4-1/2" (2.2 x 11.5 cm)
Full Range
Maximum
input power 50 W/CH
Rated input
power 25 W/CH
Impedance 4 ohms/CH (3 pieces parallel)
Dimensions Width: 31-1/2" (801 mm)
Height: 1-1/16" (26 mm)
Depth: 2" (50 mm)
Weight 1.46 lbs. (0.66 kg)
Type Subwoofer system
6 - 5/16" (16 cm) woofer
Maximum
input power 100 W
Rated input
power 50 W
Impedance 8 ohms
Dimensions Width: 4 - 1/2" (115 mm)
Height: 16 - 5/8" (422 mm)
Depth: 12 - 1/16" (307 mm)
Weight 9.92 lbs. (4.50 kg)
Soundbar speaker
Subwoofer