Sunrise Medical QUICKIE F55 - Manual (Page 24)

Issue 7 22
Footrests
Screw assembly
Footplates in
up position
Fig. 17
Fig. 16
Adjusting the footrest length
To adjust the footrest length, remove the
screw assembly on the footrest stem as
shown in Fig. 16, adjust the length to
suit. Replace the bolt assembly and
tighten. Ensure the bolt is firmly located
and tightened prior to use.
Note: The internal footrest stem
may require cutting down in length
to allow the footplate position to be
raised (Fig. 16). This modification
must only be undertaken by an
approved Sunrise Medical service
agent.
Footplates
The footplates may be flipped up to aid
entry and exit from the chair (Fig. 17).
WARNING
Do not use the footplates to stand
on, as the full weight of your body
may cause the chair to tip
forwards, and could damage the
footrests.