Call setup – Siemens M75 User Manual

Page 83

Setup

\Siemens\MobilePhones\M75 Si

rius\en\LA\SIR_CallSetup.fm

Template:

X75, Version 2.

1; VAR Language: en; VAR issue date:

050524

left page (82)

of M75 Sirius FUG en, A31008-H7430-A1-1-7619 (04.06.2005, 09:01)

Setup

Call setup

Select function.

Hide ID

When you make a call, your phone

number can be displayed on the re-

cipient's display (depending on the

service providers).
To suppress this display, you can

enable the “Hide ID” mode for all sub-

sequent calls or just for the next call.

You may need to register separately

with your service provider for these

functions.

Call waiting

If you are registered for this service,

you can check whether it is set and

you can activate/deactivate it.

Divert

You can specify the conditions under

which calls should be diverted to

your mailbox or other numbers.
Status check
You can check the current divert

status for all conditions. After a

short pause, the current situation

is transmitted by the network and

displayed.

Condition set.

Not set.

Display if status is un-

known (e.g. with a new

SIM card).

Clear all

All set diversions are cleared.

Set up call divert (example)

The most common condition for call

divert is, for example:
Unanswered

Select

Unanswered

(Includes the conditions

Not reachable

No reply

Busy

, see below.)

Confirm.

Set

Select.

Confirm.

Select or enter the phone

number to which the calls

are to be diverted.

§Mailbox§

Use existing mail-

box phone numbers, or

enter them if necessary.

§OK§

Confirm. After a short

pause, the setting is con-

firmed by the network.