Call options, Direct call – Siemens M75 User Manual
Page 28
27
Calling
© Siemens AG 2003, E:\Auftr
ag\Siemens\MobilePhones\M75
Sirius\en\LA\SIR_Phone.fm
Template:
X75, Version 2.
1; VAR Language: en; VAR issue date:
050524
right page (27)
of M75 Sirius FUG en, A31008-H7430-A1-1-7619 (04.06.2005, 09:01)
End
B
All
calls in the conference
are ended when you press
the End key.
Call options
The following functions are only
available during a call:
C
Press.
Direct call
If this is active, only one number can
be dialled.
Switch on
C
¢
T
¢
Security
¢
Direct call
C
Confirm selection.
J
Enter phone code.
When first prompted you define and
enter the phone code (4–8 digits).
C
Confirm selection.
Please do not forget this code (page 17)!
Ï
/
J
Select phone number
from the Phonebook/
Addressbook or enter it.
C
Confirm.
Hold
Hold current call.
Microphone
on
If switched off, the person
on the other end of the line
cannot hear you (muting).
Also:
*
Press and hold.
Handsfree
Playback through the
loudspeaker.
Volume
Adjust handset volume.
Default book
Phonebook/Addressbook.
Conference
Time/charge
Display talktime that has
elapsed so far and (if set)
charges incurred during
Send DTMF
Enter tone sequences
(numbers) for remote in-
quiries to an answering
machine.
Call transfer
=
Connect the original call to
a second call. For you,
both calls are now ended.
Main menu
Access to the main menu.
Call status
List all held and active calls
(e.g. participants in a con-
ference).