Tone sequences (dtmf) – Siemens M75 User Manual
Page 29
Calling
28
© Siemens AG 2003, E:\Auftr
ag\Siemens\MobilePhones\M75
Sirius\en\LA\SIR_Phone.fm
Template:
X75, Version 2.
1; VAR Language: en; VAR issue date:
050524
left page (28)
of M75 Sirius FUG en, A31008-H7430-A1-1-7619 (04.06.2005, 09:01)
Apply
§Carola§
To dial the phone number
(e.g. Carola’s phone
number), press and hold
the right softkey.
Switch off
#
Press and hold.
J
Enter phone code.
C
Confirm input.
Tone sequences (DTMF)
You can, for example, enter control
codes (numbers) for remote access
to an automatic answering machine
while another connection exists
. These
entries are transmitted directly as
DTMF codes (control codes).
C
Open the call menu.
Send DTMF
Select.
Using the Phonebook/
Addressbook
Store phone numbers and control
codes (DTMF codes) in the Phone-
book/Addressbook in the same way
as a normal entry.
J
Enter phone number.
0
Press until a “+” appears
in the display (wait for
the connection to be
established).
J
Enter DTMF codes
(numbers).
0
If necessary, wait again
for three seconds at a
time for the receiver to
process the entries safely.
J
Enter a name.
§Save§
Store entry.
You may also store just the
DTMFcodes (numbers) and then
send them during the call.