Subaru Monitor - Manual (Page 31)

32
■ Keyless entry system programming
You can program certain items related to the keyless entry system using the following procedure:
1 Select .
Select or set the following items.
LOCK SIGNAL
The keyless entry system has an answerback signaling function, which notifies the
driver by electronic chirp and the turn signal lights when locking or unlocking
operation performed. Please select or deselect the activation or deactivation of the
electronic chirp and turn signal lights. The electronic chirp can be selected using the
“BEEP“ icon, and the turn signal lights using the “LIGHT“ icon.
RESET
Select this button to revert all settings performed on this screen to the default
settings.
This completes the procedure.
NOTE
• Each setting becomes effective as soon as you make it.
• The monitor system returns to the vehicle information screen when you select .
• The answerback signaling setting is only enabled when your vehicle has that function.
• For detailed information on how to operate the keyless entry system, refer to your vehicle owner's manual.
Displaying Vehicle Information and Programming Vehicle System Functions
Press the button and then select .
00X_Monitor_r4 05.2.24 7:16 PM Page 32