Samsung RF266 - Manual (Page 11)

Setting Up _11
12
12
10
11
01
s
E
tting
u
P
REattaCHing tHE REFRigERatoR DooRs
assemble the Refrigerator doors
1. Reattach two flat head screws( 1 ) and two hex head
screws( 2 ) to the hinge completely.
2. Place the hole in the bottom of the door( 3 )over the lower
hinge ( 4 )
Be aware not to miss the hinge cap because it can
be easily taken off.
3. Insert the upper hinge shaft( 5 ) into the hole on the
corner of the Refrigerator door( 6 ). Make sure the hinge
is level between the upper hinge hole( 7 ) and the hole of
the cabinet( 8 ) and reattach the hinge screws( 9 ) and
ground screw( 10 ) by turning in a clockwise direction.
Reconnect the wires.
4. Place the front edge of the top table( 11 ) on the front of the
upper hinge( 12 ) and reattach with three screws.
When reattaching the top table, make sure that the
wires are not pressed or damaged by the top table.
5
6
7
8
9
10
12
11