Woodstock SHOP FOX W1709 - Manual (Page 14)

ASSEMBLY
-12-
Dust Collection
The Model W1709 features a dust port and an
adapter located on top of the machine as
shown in
Figures 10 and 11. Before performing
any sanding operation, attach the dust port to
a 2HP or better dust collector, which can draw
at least 1,200 CFMs, or dust buildup will hinder
the performance of your sander.
Even with a sufficient dust collection system, a
fine layer of dust may still be present on your
stock as it comes out of the sander. This
residual dust is a normal condition.
Figure 11. Dust collection hose
attached to dust port.
Figure 10. Dust collection adapters.
ALWAYS wear your
respirator in addition to
using a dust collector.
This machine produces
sawdust that may cause
allergic reactions or
respiratory problems.
DO NOT operate this
machine without an
adequate dust collection
system. This machine
creates substantial amounts
of wood dust while in
operation. Failure to use a
dust collection system can
result in short and long-
term respiratory illness.