Shure 810 User Manual

Page 2

SPEAKER SPECIFICATIONS

Frequency Response

500 to 5,000 Hz (see Figure 4)

Sensitivity (at 1,000 Hz)

116 dB SPL at 10 mm with 1 mW input

Impedance

Ω

at 0.1 W, 1 kHz

Input Power

0.75 W normal
1.5 W maximum

[63.5]

2.500

[67.6]

2.661

[73.7]

2.900

[83.5]

3.288

[28.6]

1.125

[39.4]

1.552

Units = in. [mm]

OVERALL DIMENSIONS

FIGURE 2

ACCESSORIES
Screwdriver

80B498

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

REPLACEMENT PARTS
Grommet

66C346A

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Earphone Jack Plug

66C336

. . . . . . . . . . . . . . . . . . . . . . .

MOUNTING

The 810 is provided with a 360

rotating spring clip on

the rear case with positive detent stops every 45

БББББББББББББББ

20000

1000

10000

100

+10

–10

TYPICAL MICROPHONE FREQUENCY RESPONSE

FIGURE 3

ББББББББББББ

1000

10000

100

TYPICAL SPEAKER FREQUENCY RESPONSE

FIGURE 4

ALL RESISTORS 1/4 WATT, 2%, UNLESS OTHERWISE
SPECIFIED.

ELECTROLYTIC CAPACITORS SHOWN IN

F X VOLTS.

NON-POLARIZED CAPACITORS IN

F, TOLERANCE10%, AND

50 V OR MORE UNLESS OTHERWISE SPECIFIED.

THE FOLLOWING SYMBOLS DENOTE:.

NOTES:

P.C. GROUND

CHASSIS GROUND

N/C

5.1k

INTERNAL CONNECTIONS

FIGURE 5

SHURE Incorporated Web Address: http://www.shure.com
222 Hartrey Avenue, Evanston, IL 60202–3696, U.S.A.
Phone: 847-866–2200 Fax: 847-866-2279
In Europe, Phone: 49-7131-72140 Fax: 49-7131-721414
In Asia, Phone: 852-2893-4290 Fax: 852-2893-4055
Elsewhere, Phone: 847-866–2200 Fax: 847-866-2585