SPT SD-2201S - Manual (Page 5)

3
The rinse aid is released d uring the final rinse to prevent water from forming droplets on your dishes. That can leave
spots and streaks. It also improves drying by allowing water to sheet off the dish es. Your dishwasher is designed to
use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser. To fill the
dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns c ompletely bla ck.
The volume of the rins e aid container is about 110ml.
Rinse Aid Dispenser
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.
As the rinse aid d iminishes, the size o f the black dot
on the rinse aid level indicator changes, as illustra ted b elow.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to eliminate spotting
Empty
When to Refill the Rinse Aid Dispenser
If th ere is no rinse-aid warning ligh t in the c ontrol panel, you can jud ge the amount of rinse-aid by the color
of the optical level indicator
located ne xt to the cap. When th e rinse-aid c ontainer is full, the whole
indicator will be dark .As the rinse -aid diminishes, the size of the dark dot de creases. You should never let
the rinse aid get below 1 / 4 full.
" "
Attention!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dis penser with any o ther substances
(e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.
To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.
Pour the rinse aid into the dispenser, being careful not to overfill.
Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow. 1
2
3
during the next wash. D on't forget to replace the cap before you close dishwasher door.
Clean up any ri nse aid split during filling with an abso rbent cloth t o avoid excessive foamin g