Scag Power Equipment SFZ - Manual (Page 2)

FAILURE TO FOLLOW SAFE OPERATING PRACTICES
MAY RESULT IN SERIOUS INJURY.
REMEMBER - YOUR MOWER IS ONLY AS SAFE AS THE OPERATOR!
Hazard control and accident prevention are dependent upon the awareness,
concern, prudence, and proper training of the personnel involved in the
operation, transport, maintenance, and storage of the equipment.
This manual covers the operating instructions
and illustrated parts list for:
SFZ48-19KA with a serial number of D1700001 to D1799999
SFZ48-26BS with a serial number of D1500001 to D1599999
SFZ52-19KA with a serial number of D1900001 to D1999999
SFZ52-26BS with a serial number of D1800001 to D1899999
SMFZ-48 with a serial number of D1600001 to D1699999
SMFZ-52 with a serial number of D2000001 to D2099999
Always use the entire serial number listed on the serial number
tag when referring to this product.
WARNING:
* Read this manual completely as well as other manuals that came
with your mower.
* DO NOT operate on steep slopes. To check a slope, attempt to back
up it (with the cutter deck down). If the machine can back up the slope
without the wheels slipping, reduce speed and use extreme caution.
Under no circumstances should the machine be operated on slopes
greater than 15 degrees. ALWAYS FOLLOW OSHA APPROVED
OPERATION.
* DO NOT mow on wet grass. Wet grass reduces traction and steering
control.
* Keep all shields in place, especially the grass discharge chute.
* Before performing any maintenance or service, stop the machine and
remove the spark plug wire and ignition key.
* If a mechanism becomes clogged, stop the engine before cleaning.
* Keep hands, feet and clothing away from power-driven parts.
* Keep others off the tractor (only one person at a time)