Sherwood RD-7502 - Manual (Page 50)

ENGLISH
50
SETTING THE SOUND PARAMETER
When selecting the NIGHT MODE
• This function compresses the dynamic range of previously specified parts of the Dolby Digital or DTS sound track (with
extremely high volume) to minimize the difference in volume between the specified and non-specified parts.
This makes it easy to hear all of the sound track when watching movies at night at low levels.
Notes:
• The night mode setting is valid only when the digital signals from the Dolby Digital or DTS program source are being input.
• In some Dolby Digital or DTS softwares, the night mode setting may not be valid.
0.0
0.1 Lower compression
0.2
:
:
:
0.9
Higher compression
1.0
1.
Press the CURSOR UP( )/DOWN( ) buttons to select the “NIGHT”.
2.
Press the CURSOR LEFT( )/ RIGHT( ) buttons to adjust the dynamic range compression as desired.
7
8
0
9
DISPLAY
SEL SEL
P.SCAN
CH.LEVEL
MUTE
D/A MODE
SETUP
TONE SOUND PARAMETER
ENTER
VOLUME
VIDEO 1 TAPE VIDEO 2 VIDEO 3
EXT.IN
CD FM/AM/XM AUX
T E S T
ST ER EO
SU RR O U N D SEARCH MODE
7
0
DISPLAY
SEL SEL
P.SCAN
CH.LEVEL
MUTE
D/A MODE
SETUP
TONE SOUND PARAMETER
ENTER
VOLUME
VIDEO 1 TAPE VIDEO 2 VIDEO 3
EXT.IN
CD FM/AM/XM AUX
T E S T
ST ER EO
SU RR O U N D SEARCH MODE
PARAMTR NIGHT : 0.0 / 0.0~1.0
PLII MSC
DOLBY HP
DOLBY VS
RETURN
PANO : OFF / ON
C.WIDTH : 3 / 0~7
DIMEN : 0 / -3~+3
RETURN
DH1 : MOVIE / MSC1 / MSC2
DH2 : MSC1 / MSC2 / MOVIE
DH3 : MSC2 / MOVIE / MSC1
RETURN
REF : 2 SP / 3 SP
WIDE : 2 SP / 2 SP~5 SP
RETURN
• NIGHT (NIGHT MODE) : To adjust the dynamic range compression that makes faint sound easier to hear at low volume levels.
• PLII MSC (DOLBY PLII MUSIC) : To adjust the various surround parameters for optimum surround effect.
• DOLBY HP (DOLBY HEADPHONE) : To select the desired listening mode for each Dolby Headphone mode.
• DOLBY VS (DOLBY VIRTUAL SPEAKER) : To select the speaker layout to be used actually for each Dolby Virtual Speaker mode.
• RETURN : To return to the previous menu.