Sharp COLORINKJET AJ-5030 - Manual (Page 17)

Setup
15
1. Ins
tall
a
tion
Connecting a parallel cable
Note: Use only an IEEE 1284 compliant parallel cable that is no
longer than 6 feet.
Releasing the scanner
Before turning on the power, push the release down to release the
scanner lock.
♦ If you ever need to move the Color Inkjet, pull the release back up
to lock the scanner before moving (pull the release up after you
have turned off the power).
Fasten the clips
onto the cable
connector.
all.book Page 15 Wednesday, January 31, 2001 4:29 PM