Philips Saeco Presso SUP021YTDR - Manual (Page 13)

ENGLISH
13 PROGRAMMING MACHINE FUNCTIONS
The following programming features can be changed to suit your needs.
SELECT PRODUCT
READY FOR USE
ENERGY SAVING *
RINSING
ENERGY SAVING *
RINSING
ENERGY SAVING *
RINSING
ENERGY SAVING *
RINSING
ENERGY SAVING *
RINSING ENERGY SAVING
SELECT PRODUCT
READY FOR USE
RINSING *
LANGUAGE
RINSING
OFF
RINSING
ON
PROGRAMMING
ST
ART
ENERGY SA
VING
RINSING
Press the “M” button to
access the programming
mode.
Use the “∧” and “∨”
buttons to display/change
the menus.
Using the “M” button you can
select the menu item marked
with an “
*
”
Press ESC to exit without
making any changes.
Use the “M” button to
select a menu or confirm
a change.
The display will show
that the machine is in the
standby mode.
Press the “M” button to
restore the machine to
normal operation.
When this function is activated, the internal machine
circuits will be rinsed immediately after the warming-up
phase to ensure that coffee is prepared with fresh water
only.
From this menu you can
disactivate the function.
When the appliance is used infrequently (i.e. will not be in
use for a period longer than 2 hours), it can be switched to
the STANDBY mode.
With this function you can cut energy costs.
When the function
appears, select it using the
“M” button.
In all new appliances this function has already been
activated in the factory.
Press the “M” button to
confirm your choice.
When the function
appears, select it using the
“M” button.